On the Hardware settings tab of the master card select “Internal Xtal” for the “Master Clock setting”. The installed sound cards will appear down the right hand side of the panel. If a Delta Audiophile 192 card is part of your setup, make sure to use this card as the last device in the synchronization chain.Ģ. Each additional card must be hooked in a daisy chain type of configuration. Connect the 75-Ohm cable from the out S/PDIF connection of the card sending master clock to the in connection of the receiving card. Examples of SPDIF cables can be found at 1. Although analog RCA may appear to work, it is not reliable. Note about SPDIF cables, these cables are not the same type of cabling used for analog audio, the internal resistance of the cable is different than for analog audio.
Note that the S/PDIF connections on the Delta Audiophile 192 are both orange, but are labeled accordingly (I=in, O=out). SPDIF cables can be obtained from any Music Industry store or Home Stereo store. On the Delta series sound cards, the out is white and the in is red. The S/PDIF connections on the sound cards are color coded for in and out. The rest of the cards that are synced must receive signal from the card sending the signal. When linking Delta cards, one card sends the master clock signal.
Pro Tools M-Powered does not support the use of more than 1 interface at a time.Ĭonfiguring two or more Delta cards together can be done by linking the cards together through the use of external hardware lock via a 75-Ohm RCA SPDIF cable to allow synchronization between the cards. I have two delta's connected with out any probelms.
0 kommentar(er)
